Window furnishings ⌄
- Search
The dining chairs still fit your table, but the seats look tired. Perhaps one chair feels lower than the others, or you would like a different colour without replacing a familiar set. Before choosing fabric, it helps to work out what you want the upholstery work to achieve.
A useful dining chair reupholstery enquiry describes the whole set, separates appearance from comfort and identifies any concerns about the timber. That gives the conversation a clearer starting point than a photograph of one seat and a request for a price.
This guide explains what to check at home, what to photograph and how to compare the proposed work. You do not need to diagnose the construction or take a chair apart. Your task is to describe what you have and what you would like to keep or change.
Sit at the table as you normally would. Think about the chair's width, the shape of its back and whether you can move it easily. A chair can be worth considering for reupholstery because its proportions suit the room, it fits the table well or it has personal significance. A recognisable maker's name is not required to begin an enquiry.
Write a short list of the features you want to retain. This might include the current seat height, a slim profile or a particular edge detail. Then list the problems separately: a worn cover, an uncomfortable seat, a mark on the timber or movement in the frame.
Separating these observations helps prevent a colour update from becoming the assumed answer to every concern. It also leaves room to compare reupholstery with replacement once the condition and proposed work are understood. There is no need to decide that the chairs are definitely worth keeping before asking for an assessment.
The visible cover is only one part of an upholstered chair. A seat that looks worn may still feel comfortable. Another may look presentable but feel uneven or different from the rest of the set. Those are different starting points for a quotation.
For the cover, note the areas you want addressed: the front edge, corners, seat centre, upholstered back or decorative trim. Say whether you want to retain the existing shape and details or explore a simpler appearance. Do not assume that removing piping or changing a seam will automatically reduce the cost; ask what is suitable and how it changes the scope.
For comfort, use ordinary descriptions. “This seat feels lower than the other five” is more useful than guessing which material has failed. Explain whether the issue affects every chair or only a few, and whether it is recent or longstanding.
If you want to replace chair seat padding, make that a specific discussion point. Ask what is proposed, what remains in place and whether any support beneath the padding needs consideration. New fabric alone should not be treated as a solution to an underlying comfort problem. Tempo's upholstery and reupholstery service considers the furniture and its condition alongside the fabric choice.
Comfort is also about the relationship between the chair and the table. Before requesting a fuller or firmer seat, consider how the existing chair works when someone is seated at the table, rather than judging its appearance on its own.
Record the approximate height from the floor to the top of the current seat. Note whether there is comfortable space beneath the table edge or apron, and whether armchairs slide into their usual positions. If a chair already feels too high, too low or difficult to tuck away, include that in the brief.
Photograph a chair beside the table from the side. This helps show the proportions you want to preserve. Measurements are a useful starting point, but they do not replace a discussion about the finished seat and how it feels in use.
Avoid specifying extra padding as the solution before that conversation. Instead, describe the result you want: a less tired seat while keeping a similar height, for example. Ask how any proposed upholstery changes may affect the seat profile and table clearance. If a finish or sample needs your approval, clarify that step before the work proceeds.
A set is not always a group of identical jobs. It may include two armchairs, chairs with upholstered backs or a replacement chair acquired later. Some seats may have been used more often than others. A quotation based on a single photograph can miss those differences.
Count the chairs and group them by type. For example, describe six side chairs and two armchairs, rather than simply “eight dining chairs”. If only some have upholstered backs, say whether the front, back or both faces are part of the enquiry.
Give each chair a temporary label in your notes, such as A to H. Match photographs and comments to those labels without attaching anything that could mark the furniture. That makes it easier to explain that chair C feels uneven while chair F has a damaged cover.
Decide whether your priority is a consistent look across the set, a consistent sitting experience or both. That distinction is especially helpful when the chairs share an appearance but do not all feel the same to sit on.

Exposed timber deserves its own observations. Photograph scratches, worn finishes, splits or areas where there is movement. Describe what you have noticed without naming a repair method or assuming it can be included with the upholstery.
If a chair feels unstable, do not keep sitting on it to test the problem. Mention that concern at the beginning of the enquiry and ask what assessment is needed. There is no need to remove the seat, peel back the fabric or dismantle the frame to produce a more detailed photograph.
Where both timber and upholstered areas need attention, ask for the proposed work to be distinguished clearly. You should be able to tell which concerns are included, which require further assessment and which are outside the quotation. Tempo's furniture restoration information is a useful starting point for discussing the parts of a dining setting beyond its upholstery. Suitability and scope need to be considered for the individual piece.

Clear photographs help someone understand the enquiry before arranging the next step. They do not have to be styled. Move loose items out of the way, use good light and keep the chair visible from edge to edge.
Include these views where they can be taken safely:
Avoid sending only close-ups. A photograph of a worn corner is more useful when it is accompanied by a full view of the chair. Equally, a room photograph may not show the detail needed to understand a damaged seat.
Keep the files grouped by chair or concern and add short captions. You can say that a problem is difficult to show in a photograph. A plain description of what feels different is preferable to repeatedly trying to capture it on camera.
Include approximate overall width, depth and height, along with seat width, depth and height if you can measure them easily. State which dimensions refer to the whole chair and which refer to the upholstered seat. Note differences between side chairs and armchairs rather than applying one measurement to the entire set.
Your suburb and access details also help frame the conversation. Mention stairs, a lift, restricted parking or a narrow entrance if relevant. Ask how collection and return would be arranged and whether these are included in the proposal. Do not assume that sending photographs means transport has been organised.
Share any preferred completion date and explain whether it is flexible. If you need the chairs for a particular gathering, raise that before making other arrangements. Material availability, the agreed work and scheduling all need to be considered; a date should be confirmed for your project.
It is also useful to say whether the dining set is used every day and whether you have other seating available. That gives context for discussing the practical impact of having the chairs away.
Fabric still matters, but it is easier to discuss once the areas being upholstered and the comfort brief are clear. Bring references for the look you want, alongside photographs of the table, flooring and nearby furnishings you intend to keep.
Describe how the chairs are used and ask about suitability, care and any limitations of the fabrics under consideration. If you like a stripe, large motif or a contrast between seats and backs, ask how that choice would be arranged across the set. Confirm the fabric selection and quantity within the quotation rather than estimating from the size of one seat.
Keep this stage practical: what will be covered, what appearance are you approving and how should it be cared for? For a more detailed fabric discussion, read five questions to ask before choosing upholstery fabric. Here, the priority is making sure the fabric decision sits within a clearly described chair project.
If the dining table is your only everyday eating space, you may be considering having some chairs done before the others. Raise that preference when requesting the quotation, rather than treating it as a transport detail to resolve later.
Ask whether a staged approach is practical for the proposed work and how it would affect the arrangements. Confirm which chairs would be involved at each stage, what happens to any materials intended for later work and how the remaining chairs would be identified. Separate collection or return arrangements should be discussed rather than assumed to be included.
Matching deserves particular attention when the stages might be months apart. Do not rely on being able to order the same fabric indefinitely. Ask what can be agreed now and what would need to be reconsidered later. You can then weigh the convenience of keeping some chairs at home against the coordination involved. If doing the complete set together is more suitable, plan alternative seating before confirming the timing.
Two totals are only useful to compare when you understand what each includes. Before deciding, check that both proposals refer to the same number of chairs, the same upholstered areas and the same intended result.
Read the scope with your original photographs and notes beside it. Look for clear answers to these questions:
Ask for clarification where a phrase such as “recover chairs” leaves an important detail open. A lower total may reflect less work, a different fabric allowance or exclusions. A higher total does not explain itself either. The aim is to understand the proposal, not to infer quality from the price alone.
Also ask what happens if a further issue becomes apparent during the work. Clarify how you would be informed and how any change in scope or cost would be approved. That conversation is more useful before proceeding than after you have assumed everything is covered.
You can keep the first message concise while giving it a clear structure. Include the following information, supported by your photographs:
Attach the most informative views rather than a large batch of nearly identical images. Keep a copy of the brief so you can refer back to it when discussing options. If the proposed work changes, update the brief and ask for the quotation to reflect the agreed scope.
Describe exactly which parts you want included and ask whether that approach is suitable for your chairs. Some enquiries concern seat pads only; others include upholstered backs or more extensive work. A photograph of the complete chair helps avoid confusion about what “the seat” means.
That depends on condition and the result you want. Tell the person assessing the set about differences in comfort and any previous work you know about. Ask how the proposed approach addresses those differences. Do not assume every chair needs identical work simply because the covers will match.
Not necessarily. Compare the agreed quotation with a replacement you would genuinely choose, while considering fit, comfort and the value the existing set has for you. Include any separately quoted transport or other work in your comparison. There is no reliable answer based only on the number of chairs.
Photographs can start the conversation, but they cannot establish everything beneath a cover or every aspect of a chair's condition. Ask what information is still needed, whether an inspection is required and which parts of the proposal remain provisional before you make a decision.
If you are considering dining chair reupholstery in Sydney, start with photographs of the complete set and a short description of what you want to retain or change. Include any comfort or timber concerns, even when the main reason for enquiring is a new fabric.
Contact Tempo Interiors to discuss the information needed for your project. You can email photographs to info@tempointeriors.com.au or call 02 9960 2844. The Mosman studio is at 52 Ourimbah Road, Mosman NSW 2088, with visits by appointment Monday to Friday, 10am–4pm.
The next step is a clear conversation about your chairs, their condition and the proposed work, so you can decide whether reupholstery is the right approach for your set.
Found this guide useful? Add Tempo Interiors as a preferred source on Google.
SHIPPING
At Tempo Interiors we offer two different types of delivery, determined by the products in your order to ensure a great delivery experience.
We use specialist furniture removalist companies for all larger furniture items. Homewares and accessories are sent by Fastway carrier, rugs are sent by Startrack. Please note that multiple product orders are charged according to the product with the highest delivery type.
HOW DOES THE DELIVERY PROCESS WORK FOR FURNITURE?
Once items are dispatched, our allocated Transport Company for your area will contact the preferred delivery contact provided via phone or text to arrange delivery. Upon approach the transport company will make contact approximately half an hour ahead of delivery taking place to ensure both parties are prepared. Once on location the delivery will take place.
Our Transport Companies will perform a white glove service on delivery. White glove entails a full unpack, assemble, product placement and rubbish removal. All steps are taken with care and pride to ensure that any damages are avoided. Please inspect all deliveries before signing to accept the order.
HOW DOES DELIVERY PROCESS WORK FOR HOMEWARES?
Once dispatched from our supplier the carrier will deliver your order to your specified delivery address during business hours and orders must be signed for. Please ensure your delivery address is available during business hours.
HOW LONG FROM PLACEMENT OF ORDER ARE GOODS PICKED AND DISPATCHED?
Once the order has been paid, confirmed and processed We will pick and pack items within 48 hours of placement of order.
Orders are dispatched depending on the location.
CAN I PICK UP FROM The WAREHOUSE?
Yes, if you prefer to pick up items, please ensure to make prior arrangements with either the warehouse or your sales consultant.
WHAT IS ‘WHITE GLOVE’ DELIVERY?
All furniture orders come with our premium white glove service which includes full unpack of your goods, assembly, product placement and rubbish removal.
FREE FREIGHT
Tempo Interiors offer free freight on orders (metro deliveries) of $5,000 and above and capped freight at $170 on orders below $5,000 This is inclusive of GST. Metro covers deliveries to all suburbs within a 30 Kilometer radius of Brisbane, Sydney and Melbourne cities. All deliveries outside the metro area require a quote from Tempo Interiors.
HOW IS FREIGHT CALCULATED?
Freight is determined on several different aspects, these include size, location and frangibility. It is important to remember that freight is quoted based on ground level access, Deliveries into high rise units or access via stairs and lifts are considered an additional service and may incur further charges that will alter the freight quote.
TO AVOID ANY ADDITIONAL CHARGES, IT IS IMPORTANT TO ASK YOURSELF THE FOLLOWING QUESTIONS:
WHAT TO DO WHEN THE TRANSPORT COMPANY ARRIVES?
It’s very important that once the product has arrived that you thoroughly check items prior to signing for it. Any damages that may be found need to be reported on the spot and the transport company will return order for Tempo Interiors to revise.
During the quality control process the warehouse team insert a card into every box, that card will provide all necessary steps to undertake if stock arrives damage.
Please note all items must be personally inspected upon unpacking, as once the delivery is signed for claim of damage and faults may not be accepted by the carrier.
WHAT HAPPENS IF DELIVERY DOESN'T ARRIVE?
In the rare event that your delivery doesn’t arrive please contact Customer Care on 02 9960 2844, they will then track down order and resolve accordingly.
WHAT HAPPENS IF MY PRODUCT ARRIVES BROKEN?
During the quality control process the warehouse team insert a card into every box, that card will provide all necessary steps to undertake if stock arrives damage.
Please note all items must be personally inspected upon unpacking, as once the delivery is signed for claim of damage and faults may not be accepted by the carrier.
Please contact Customer Care on 02 9960 2844 for all further information.
DELIVERY TIMELINES
FURNITURE | Hunter & Co & Aussie Home Removals
Sydney Metro 2 Weeks
FURNITURE | INBOX
Melbourne Metro 2-3 Weeks
FURNITURE | Swift or DJ Lindsay
Brisbane & Gold Coast Metro 1-2 Weeks
FURNITURE | Anything and everything
Sunshine Coast Region 1-2 Weeks
FURNITURE | Pedemonts Transport
Adelaide Metro 3+ Weeks
Perth Metro 4+ Weeks
Please Note: All Regional areas require a Quote for all carriers. Contact your sales consultant for more information.
HOMEWARES | Partner Carrier Fastway or Startrack
Brisbane 1-3 Business Days
Sydney 1-4 Business Days
Melbourne 3-5 Business Days
Adelaide 3-6 Business Days
Perth 4-7 Business Days