November 04, 2026

The curtains may still be in good condition, yet the top of the window never quite looks finished. Perhaps the track is more noticeable than you would like, daylight appears above the curtain, or an old pelmet feels too heavy for the room. Replacing everything is not the only starting point. First, find out what is worth keeping and what a different top treatment could realistically improve.

Curtain pelmets in Sydney can be simple and architectural or upholstered and decorative. A valance gives a softer fabric finish. Choosing between them involves more than finding a colour: the curtain heading, hardware, available space and way the curtains move all matter.

This guide explains how to approach a pelmet or valance when you are keeping some or all of your existing window furnishings. It also helps you prepare a useful brief if new curtains are part of the plan. The aim is a window that looks considered, operates comfortably and meets the priorities you actually have.

Two views of curtain pelmets: a pale pelmet in a blue room and a dark pelmet with a yellow border
A quiet outline and a contrasting border create different effects above a curtain. Existing Tempo website imagery.

Start with the problem you want to solve

Stand back and look at the whole window, then open and close the curtains. Is the issue mainly appearance, unwanted light, a lack of privacy or awkward operation? These are related questions, but they do not necessarily have the same answer.

If you dislike a visible track, a pelmet may be worth considering. If the curtains are difficult to draw, the track or heading needs assessment before anything is concealed. If the room is too bright for sleeping, look at where the light enters: above, below, down the sides or between the curtains. Covering the top will not address every gap.

Write a short priority list before collecting inspiration images. For example: keep the existing fabric, conceal the track, preserve as much daylight as possible when open, and use a quieter finish. That gives the design conversation a direction and makes it easier to judge whether a proposed detail earns its place.

Understand what a pelmet and a valance do

A pelmet usually has a structured form across the top of a window. It may be upholstered or have another finish appropriate to the design. A valance is generally a softer fabric treatment. Terminology varies between suppliers, so photographs and a description of the construction are more useful than relying on a name alone.

Both can draw attention to the top of the window and conceal some of the hardware behind it. A straight, restrained pelmet and a gathered valance create very different effects, even in the same fabric. Neither is automatically the right choice for every period home or contemporary room.

Compare the outline with the architecture: ceiling height, cornice, window frame and nearby joinery. Think about whether the finish should quietly connect those elements or introduce a deliberate decorative detail. Tempo's custom pelmet and valance service starts with these relationships rather than treating the top of the window as a separate accessory.

Check what can stay before deciding what to make

Keeping curtains can be a sensible option when their condition, length and appearance still suit the room. Look for fading, worn edges, damaged lining and areas that no longer hang as intended. Explain any concerns before a new pelmet is designed around them.

The existing hardware needs its own assessment. A track that works with today's curtains may need adjustment or replacement if another layer is added. Brackets, curtain hooks and the heading all occupy space. A new cover cannot be sized reliably from the visible width of the window alone.

If you already have a pelmet, photograph it from the front and side, along with the curtain underneath. Ask whether the structure is suitable to retain, recover or replace. Do not assume that a cosmetic change is possible until the construction and fixing arrangement have been checked. Equally, do not discard a useful existing component before discussing it.

The first enquiry can use photographs and approximate dimensions. Final making and installation measurements should be confirmed by the person responsible for that part of the work.

Cream curtains with a dark geometric pattern gathered beneath a dark curtain rod
The curtain heading and hardware need to be considered before designing a cover above them.

Plan the width around the open curtains

Curtains occupy space when drawn back. This gathered area is often called the stack-back. Its size depends on the fabric, heading, fullness, lining and track arrangement. A curtain can therefore cover part of the glass even when it is fully open.

This matters particularly with a narrow window or a room where daylight is precious. A pelmet made only to the window width might leave little flexibility for the curtains to move clear. Extending the treatment may help in some situations, but adjacent walls, doors or joinery can limit the available space.

Ask to see the proposed arrangement with the curtains both open and closed. Where will each stack sit? Will it cover the window frame, glass or a wall area? Is there enough room for the curtain to move without catching? These questions are more useful than choosing a standard amount to add at each end.

If the existing curtains are changing, settle their heading and arrangement before finalising the pelmet. The curtains service in Sydney is a useful starting point for discussing the fabric, heading and hardware together.

Separate the visible depth from the space behind it

The depth you see from the room is only one dimension. The space behind the front of the pelmet also has to accommodate the hardware and the moving curtain. Two designs can look similar from the doorway but provide very different clearance behind them.

A deep face may hide more of the curtain heading, but it can also cover more glass or feel visually heavy. A shallow face may be appealing, yet fail to conceal the parts you wanted hidden. Consider a simple elevation or marked-up photograph showing the proposed lower edge before approving the design.

Check the side view as well. Window handles, projecting sills, cornices and a second curtain layer may affect the required clearance. For a bay or corner window, the meeting points need attention rather than assuming that each section can be treated independently.

There is no universal pelmet measurement that suits every window. Ask for the dimensions to be explained in relation to the actual curtain and room, with access for maintenance considered at the same time.

Be clear about light control

A pelmet can help address light coming through the top of a curtain arrangement, but it does not guarantee a completely dark room. Fabric performance and the gaps around the finished installation are separate issues. Light may still enter at the sides, centre or floor.

If darkness is the priority, describe how and when the room is used. A bedroom used during daylight needs a different discussion from a living room where the main concern is afternoon glare. Photograph the troublesome gaps at the relevant time, keeping in mind that a phone camera can exaggerate or reduce the apparent brightness.

Ask the consultant to explain the complete arrangement, including lining, overlap, returns and any other proposed layer. Also ask what limitations remain. The useful outcome is a realistic expectation for the room, not a promise based only on the word “blockout”.

A sheer curtain can soften daylight and the view, but it should not be assumed to provide privacy after dark when the room is lit. Consider the window in both daytime and evening conditions before choosing what stays behind the pelmet.

Treat thermal comfort as a whole-window question

The Australian Government's Your Home guidance on glazing explains that well-fitted curtains and pelmets can reduce convective heat transfer by holding a layer of still air beside a window. Gaps around the arrangement affect that benefit. The construction and fit matter, not simply the presence of a decorative top treatment.

A soft valance should therefore not automatically be treated as equivalent to a suitably fitted pelmet for thermal purposes. If comfort is a major reason for the work, discuss the complete curtain arrangement and the existing window rather than choosing on appearance alone.

No single energy-saving percentage can be promised for an unspecified room. Glazing, orientation, other shading and the rest of the building all influence the result. A pelmet is also not a substitute for resolving a damaged window or other building issue. Identify those concerns early so the right professional can assess them.

Decorative braids, cords and tassel trims hanging in Tempo’s studio display
Compare trims with the curtain fabric and the room, rather than choosing a detail in isolation.

Choose fabric and trim in the context of the room

Once the form and clearance are workable, consider the surface. Matching the curtain fabric can create continuity. A complementary plain fabric may provide a calmer edge above a strong pattern. A border can define the outline without requiring the whole treatment to become visually dominant.

Look at the fabric across the intended horizontal shape. A motif that works well in vertical curtain folds may read differently across a long pelmet. Ask how a repeat will be positioned and whether seams or joins will be visible. For a valance, folds and gathering change how much of the pattern you see.

Compare the samples with the pieces that are staying: wall colour, flooring, upholstery and any nearby artwork. A trim that looks attractive on its own may compete with other details when viewed from across the room. Keep one or two clear ideas rather than collecting unrelated finishes.

Bring existing fabric samples if you have them. Tempo's Mosman showroom and sample library gives you a place to compare texture and colour with personal guidance. Confirm the particular samples you want to see when arranging an appointment.

Allow for operation and future access

The finished treatment should leave the curtains easy to use. Discuss where hands, draw wands or controls will be positioned, and how the curtains will be removed for the care their fabric requires. A neat-looking enclosure is less useful if routine access becomes difficult.

If motorisation is being considered, raise it before dimensions are approved. Compatibility, motor space, power arrangements and access for service need to be checked for the selected system. Do not assume that an existing pelmet can accommodate a later upgrade simply because the curtain fits today.

Agree who will check the fixing surface and installation requirements. Photographs can help identify questions, but they cannot establish the suitability of concealed supports. Any electrical work or other specialist work needs the relevant qualified professional. A decoration consultation does not include those services by implication.

Also discuss the order of work if painting, new joinery or other renovation work is planned. Finishing the room and installing the window treatment should be coordinated so that the agreed measurements still describe the space when the treatment arrives.

Compare complete quotes rather than a price per window

Two pelmet quotes may describe different work. One might cover a new upholstered structure and installation; another might cover only recovering an existing item. Fabric, trim, pattern matching, access and changes to the track can all alter the scope.

Ask the quote to identify what is being retained, supplied, made and installed. If new curtains or hardware are included, have them described clearly rather than assuming they are part of the pelmet price. Confirm whether removal of the old treatment, delivery and any making good are included.

Discuss timing before ordering, especially if the work depends on another trade or a special-order fabric. Confirm applicable order and cancellation conditions rather than assuming that a made-to-measure item can be returned after manufacture because you change your mind about the shape.

You do not need the most elaborate option to achieve a considered finish. A clear brief can help keep attention on the parts that solve the problem. It also gives you a fair basis for comparing proposals without inventing a standard price for very different windows.

Two examples of how the brief changes the answer

These are hypothetical planning examples, not descriptions of completed Tempo projects.

In the first, a homeowner likes the existing curtains but dislikes the visible track. The curtains open smoothly and there is comfortable clearance above the window. The discussion could focus on a restrained top treatment, the depth needed to conceal the hardware and a finish that relates to the wall. Replacing the curtains may not be necessary, subject to assessment.

In the second, a narrow bedroom window has curtains that cover much of the glass even when open. The homeowner wants both more daylight and better darkness for sleep. A new decorative face alone would not resolve that brief. The curtain stack, available wall space, track and light gaps all need to be considered together before a pelmet is specified.

The difference is the starting problem, not the suburb or the amount of decoration. A Mosman home and a Northern Beaches home can have similar constraints, while two windows in the same house may need different solutions.

Prepare a brief that makes the first conversation useful

Send a photograph of the whole wall, not just the top of the curtain. Add closer views of the heading, track and any existing pelmet, plus a view with the curtains open. If access is difficult, explain that rather than climbing to take a photograph.

Include approximate window dimensions, ceiling height and the distance to nearby walls or joinery if you can obtain them safely. Mark these as preliminary. Tell the team which curtains, blinds and furnishings you want to keep, and what is changing elsewhere in the room.

Describe your priorities in order, along with a budget range and preferred timing. Mention light control, privacy and motorisation if relevant. A few labelled photographs and a clear sentence about the problem are usually more informative than a long collection of inspiration images without explanation.

Get one-to-one help with the complete window

A pelmet is a small part of a room, but it connects fabric, proportion and practical details. Tempo Interiors can help you consider those choices together, with one-to-one guidance and a Mosman team you can speak to by phone. You can discuss the window treatment itself or the wider decoration scheme, depending on the support you need.

Contact the team to discuss a window-treatment quotation and confirm the consultation and measuring arrangements, any fees, and the proposed supply and installation scope before booking. Interior design consultations are paid. Agree the responsibilities so you know who is coordinating each step.

Send a pelmet and valance enquiry with photographs and a short description of what you want to improve, or call 02 9960 2844. Studio visits at 52 Ourimbah Road, Mosman are by appointment, Monday to Friday, 10am–4pm. Start with the curtains and room you have, then decide which finish belongs with them.

Found this guide useful? Add Tempo Interiors as a preferred source on Google.



Also in News

Powder room wallpaper in Sydney: what to check before you order

November 15, 2026

Read: Powder room wallpaper in Sydney: what to check before you order
Reupholster or replace a sofa in Sydney and how to decide

November 10, 2026

Before choosing a fabric or a new sofa, compare what works, what needs changing and the complete cost of each option. Use our practical worksheet to make a considered decision for your Sydney home.
Read: Reupholster or replace a sofa in Sydney and how to decide
Curtain care in Sydney and what to check before cleaning

November 09, 2026

Read: Curtain care in Sydney and what to check before cleaning
Shipping Information

SHIPPING

At Tempo Interiors we offer two different types of delivery, determined by the products in your order to ensure a great delivery experience.

We use specialist furniture removalist companies for all larger furniture items. Homewares and accessories are sent by Fastway carrier, rugs are sent by Startrack. Please note that multiple product orders are charged according to the product with the highest delivery type.

HOW DOES THE DELIVERY PROCESS WORK FOR FURNITURE?

Once items are dispatched, our allocated Transport Company for your area will contact the preferred delivery contact provided via phone or text to arrange delivery. Upon approach the transport company will make contact approximately half an hour ahead of delivery taking place to ensure both parties are prepared. Once on location the delivery will take place.

Our Transport Companies will perform a white glove service on delivery. White glove entails a full unpack, assemble, product placement and rubbish removal. All steps are taken with care and pride to ensure that any damages are avoided. Please inspect all deliveries before signing to accept the order.

HOW DOES DELIVERY PROCESS WORK FOR HOMEWARES?

Once dispatched from our supplier the carrier will deliver your order to your specified delivery address during business hours and orders must be signed for. Please ensure your delivery address is available during business hours.

HOW LONG FROM PLACEMENT OF ORDER ARE GOODS PICKED AND DISPATCHED?

Once the order has been paid, confirmed and processed We will pick and pack items within 48 hours of placement of order.

Orders are dispatched depending on the location.

CAN I PICK UP FROM The WAREHOUSE?

Yes, if you prefer to pick up items, please ensure to make prior arrangements with either the warehouse or your sales consultant.

WHAT IS ‘WHITE GLOVE’ DELIVERY?

All furniture orders come with our premium white glove service which includes full unpack of your goods, assembly, product placement and rubbish removal.

FREE FREIGHT

Tempo Interiors offer free freight on orders (metro deliveries) of $5,000 and above and capped freight at $170 on orders below $5,000 This is inclusive of GST. Metro covers deliveries to all suburbs within a 30 Kilometer radius of Brisbane, Sydney and Melbourne cities. All deliveries outside the metro area require a quote from Tempo Interiors.

HOW IS FREIGHT CALCULATED?

Freight is determined on several different aspects, these include size, location and frangibility. It is important to remember that freight is quoted based on ground level access, Deliveries into high rise units or access via stairs and lifts are considered an additional service and may incur further charges that will alter the freight quote.

TO AVOID ANY ADDITIONAL CHARGES, IT IS IMPORTANT TO ASK YOURSELF THE FOLLOWING QUESTIONS:

WHAT TO DO WHEN THE TRANSPORT COMPANY ARRIVES?

It’s very important that once the product has arrived that you thoroughly check items prior to signing for it. Any damages that may be found need to be reported on the spot and the transport company will return order for Tempo Interiors to revise.

During the quality control process the warehouse team insert a card into every box, that card will provide all necessary steps to undertake if stock arrives damage.

Please note all items must be personally inspected upon unpacking, as once the delivery is signed for claim of damage and faults may not be accepted by the carrier.

WHAT HAPPENS IF DELIVERY DOESN'T ARRIVE?

In the rare event that your delivery doesn’t arrive please contact Customer Care on 02 9960 2844, they will then track down order and resolve accordingly.

WHAT HAPPENS IF MY PRODUCT ARRIVES BROKEN?

During the quality control process the warehouse team insert a card into every box, that card will provide all necessary steps to undertake if stock arrives damage.

Please note all items must be personally inspected upon unpacking, as once the delivery is signed for claim of damage and faults may not be accepted by the carrier.

Please contact Customer Care on 02 9960 2844 for all further information.

DELIVERY TIMELINES

FURNITURE | Hunter & Co & Aussie Home Removals

Sydney Metro 2 Weeks

 

FURNITURE | INBOX

Melbourne Metro 2-3 Weeks

 

FURNITURE | Swift or DJ Lindsay

Brisbane & Gold Coast Metro 1-2 Weeks

 

FURNITURE | Anything and everything

Sunshine Coast Region 1-2 Weeks

 

FURNITURE | Pedemonts Transport

Adelaide Metro 3+ Weeks

Perth Metro 4+ Weeks

Please Note: All Regional areas require a Quote for all carriers. Contact your sales consultant for more information.

 

HOMEWARES | Partner Carrier Fastway or Startrack

Brisbane 1-3 Business Days

Sydney 1-4 Business Days

Melbourne 3-5 Business Days

Adelaide 3-6 Business Days

Perth 4-7 Business Days